POOL FROG 5400 Series Mineral Reservoir

POOL FROG Mineral Reservoir Series 5400

For Use with the Pool Frog Model 5400

Pool FROG Sanitizing Minerals stand out as a true game-changer, creating Fresh Mineral Water in your pool—a feat no other product can match. The powerful combination of Minerals and a low level of chlorine takes on the battle against bacteria, resulting in water that is not only clean and crystal clear but also feels supremely soft. The prefilled Cartridge ensures easy replacement, eliminating mess, guesswork, and stress from your pool maintenance routine.

Key Features:

• Kills Bacteria: The Sanitizing Minerals actively work to eliminate bacteria, ensuring a hygienic pool environment.
• Helps Keep pH Balanced and Absorbs Acids: Contributes to maintaining a balanced pH level and absorbs acids for optimal water chemistry.
• Conditions the Water for Softness: Provides a soft and comfortable water experience for swimmers.

Experience the real difference with Pool FROG® Sanitizing Minerals—elevating your pool water to a level of cleanliness, clarity, and softness that sets it apart from the rest. Enjoy the ease of use and the stress-free replacement process provided by the prefilled Cartridge.

When to Replace the FROG 5400 Mineral Reservoir

• Replace Frog Mineral Reservoir every six months or after one pool season, whichever is shorter.

How to Replace the Pool FROG Mineral Reservoir 5400

1. Check the top of the box to make sure you have the correct Pool Frog Mineral Reservoir to fit your Pool Frog Cycler. The colored barcode will indicate if it fits in ground versus aboveground.
2. If you have determined you have the right mineral reservoir, open the box and remove the Pool Frog Mineral Reservoir.
3. Turn off the pump and turn the dial to Pac Removal or Setting 0 depending on the model.
4. Open the cap; if using Pool Frog Bac Pac, stand pac to avoid inhaling chlorine fumes.
5. Find the slot on the side of the Pool Frog Mineral Reservoir and insert into the cycler until secure.
6. Remove the cap from Frog Bam without removing the seal.
7. Insert it upside down into the center of the Pool Frog Mineral Reservoir, pushing down firmly on the key to puncture the seal.
8. Replace the cap by hand only. Turn the control dial on the cycler to Maximum or Setting 10 depending on the model.
9. Turn the pump on for 90 minutes, allowing Frog Bam to circulate through the pool.
10. To remove Frog Bam, turn the pump off, turn the dial to Pac Removal or Setting 0 depending on the model, and remove the cycler cap.
11. Lift Frog Bam up and allow any water in the cycler to drain through the cycler before disposing of it in the trash. If the pool requires additional Frog Bam, repeat steps 6-11. When the water is clear in the cycler, proceed to step 12.
12. Pool Frog Bac Pac is recommended to assure up to 50% reduction in chlorine use.
13. Avoid sparks, open flames, or smoking when handling the Bac Pac.
14. To remove the Bac Pac colored caps, grab onto the lip of one cap with pliers and pull up until the cap releases. Repeat the process for the other cap.
15. Turn the Bac Pac over and shake slightly until chlorine tablets fall into lower areas.
16. Line up the small leg of the Bac Pac with the small opening in the Pool Frog Mineral Reservoir and the large leg with the large opening. Lower the Bac Pac into the Pool Frog Mineral Reservoir until secure.
17. Replace the cap by hand only.
18. Mark your calendar for the 6-month replacement of your Pool Frog Mineral Reservoir, 90-day replacement of the Frog Bam, and approximate replacement times of the Pool Frog Bac Pac.

Mineral Reservoir Ingredients:

• Silver Chloride: 0.5%
• Other Ingredients: 99.5%
• Total: 100%
• Download the FROG Mineral Reservoir Safety Data Sheet