Maintain 4 lbs Chlorine Stabilizer | Conditioner
Add Stabilizer to your Pool Water
The best cyanuric acid money can buy to stabilize chlorine in your pool water and prevent the breakdown of your chlorine from the suns rays. Save $$ in Chlorine. Ensure your pool water stays pristine with our Maintain 4 lbs Chlorine Pool Water Stabilizer and Conditioner. This premium cyanuric acid stabilizer protects chlorine from sunlight, saving you money on chlorine costs.
Features:
- 100% cyanuric acid
- Increases chlorine effectiveness
- Maintains chlorine levels
- Reduces UV ray damage
- Ideal range: 40-60 ppm for chlorine pools, 50-70 ppm for saltwater pools
- Dosage: 1 lb per 5,000 gallons provides 25 ppm
Active Ingredient:
- Cyanuric Acid CAS 108-80-5
How to Add Pool Stabilizer/Conditioner:
- Clean and backwash the filter.
- For non-salt water pools, adjust free available chlorine level to 1-3 ppm with a shock treatment as per the product label.
- Measure CYA (cyanuric acid) or stabilizer levels with a test kit or strip.
- Determine the dosage from the table below.
- Add the product directly to the swimming pool with the pump running.
- If it doesn't dissolve immediately, use a pool brush or vacuum to mix it until fully dissolved. Avoid prolonged contact with surfaces.
- Alternatively, add slowly to the pool skimmer, ensuring it's free of other chemicals or debris. Add half the recommended dose immediately, wait eight hours, then add the rest. Ensure complete dissolution.
- Retest after 48 hours and repeat until the stabilizer is within the ideal range.
Pool Stabilizer/Conditioner Dosage Chart (1 lb. = about 2.25 cups.)
Dosage: Use 2.5 lbs per 10,000 gallons of pool water.
| Pool Volume | Raise by 10 ppm | Raise by 20 ppm | Raise by 30 ppm |
| 10,000 Gal. | 1 lb. | 2 lbs. | 3 lbs. |
| 20,000 Gal. | 2 lbs. | 4 lbs. | 5 lbs. |
| 40,000 Gal. | 4 lbs. | 7 lbs. | 10 lbs. |
