Coral Seas Yellow Out Chlorinating Compound, 2 lb.

Yellow Out Green and Mustard Algae Treatment

Coral Seas Yellow Out is your fast-track solution to eliminate algae, transforming your pool from green to clean within 24 hours without the need for brushing. Regular application of Coral Seas Yellow Out not only swiftly addresses algae but also reduces the reliance on copper algaecides that may stain pool surfaces.

What is Yellow Out?

Yellow Out® represents a chemical breakthrough, providing remarkable cleanup results when used in conjunction with an EPA-Registered chlorine that effectively kills green, yellow, pink, and brown algae. No brushing is needed, and it is safe for vinyl pools as well as pools with salt generators. Follow the 6-step process as directed on the back of each bottle for optimal results.

Container Size:

• 2 lbs

Check out the Yellow Out Difference:

• Before and After

Important Note:

• DO NOT MIX IN A BUCKET; APPLY DIRECTLY TO THE POOL.

Ingredients:

• Principal Functioning Agent: Di-Ammonium sulfate: 90%
• Constituents Ineffective as Adjuvant: 10%

Dosage:

• Apply 2 lbs per 15,000 gallons of water, focusing on problem areas. Run the filter continuously for 24 hours after application. Yellow Out should never be pre-mixed with chlorine or other chemicals, and it should not be added directly into the skimmer basket or filter suction line.

Instructions:

1. NEVER pre-mix YELLOW OUT with chlorine.
2. NEVER add YELLOW OUT to a bucket or pail.
3. NEVER vacuum pool immediately after application.
4. NEVER add to skimmer basket or filter suction line! Very strong reaction with chlorine can occur if not mixed in pool. Circulate pool water through filter and, for best results, brush pool well before beginning.
5. SHAKE WELL TO BREAK UP THE LUMPS (product lumping in transit is normal). Adjust chemical balance to: pH > 7.8, alkalinity 80-120 ppm, cyanuric acid 25-75 ppm, and chlorine level 2-2.5 ppm.
6. ADD DIRECTLY TO POOL 2 POUNDS YELLOW OUT per 15,000 gallons water. Spread half of it along the perimeter of the pool, starting where the algae are the thickest. Concentrate the rest directly over the problem areas. Never add more than is recommended.
7. WAIT 5 MINUTES, THEN ADD DIRECTLY TO POOL 2 pounds powdered chlorine (or equal) per 15,000 gallons water.
8. CIRCULATE POOL WATER with filtration continuously for 24 hours using only the main drain if possible. Repeat step 4, adding additional chlorine after 12 and 24 hours.
9. Return equipment and chemical balance to normal after clean up.

Download the Instructions Here.